Loftdæla 12V

RELATED VIDEO

ABOUT THIS ITEM

• No More Flat Tires: Nilight Tire Pump can inflate the 195/55/R15 car tires from 0 to 35psi within 5 minutes and capable of providing a maximum pressure of 150 psi and an airflow of 35L/Min. Professionally inflate your flat tires and much more effective and faster than traditional tire pump. A great solution for emergency on the way.
• Wide Range of Applications: 3 nozzles and a replacement fuse were Included. Inflates any Schrader valve on cars, SUVs, ATVs, motorcycles, and bicycles. The provided accessories can inflate balloons, sports balls, air pillows, cushions and mattresses quickly. NOTE: This pump is NOT intended for use with high pressure or large volume applications like trucks, pools and Inflatable canoes.
• Easy Operation & Auto Shutoff: Start car ignition, connect cigarette lighter plug to the 12V DC power outlet, set the desired value, and wait for the numbers to stop blinking. Turn on the switch, the air compressor will stop automatically when the preset value is reached. No more attention and keep an eye on it until it’s full.
• Digital Display & LED Lighting: 4 pressure measurement units of PSI, KPA, BAR, KG/CM2. The tire pressure will be displayed on the screen of the air pump so that the pressure can be better controlled when inflating tires to ensure safety. Furthermore, the air pump comes with a LED lighting feature includes backup light, warning light and flash light modes to support your inflating needs in dark environment.
• Package Includes: Nilight honors 2-year warranty. No warranty registration process, just contact us any time with any product problems. Package includes an air compress pump, 3 nozzles, a replacement fuse and an instruction manual.

 

FEATURES

Fast Inflation

Nilight air pump can inflate your standard car tires within several minutes, it doesn’t take long to put your tires at the right PSI. Normally our tire inflator takes approximately 3-6 minutes to inflate a standard tire pressure 220KPA or a little bit longer for bigger tires.

Auto Shut Off

The best feature of the tire inflator. You don’t have to monitor the air pump and check if it has gotten to the desired pressure. All you need to do is to pre-set the value and press the start button. It will automatically stop when the pre-set pressure is reached. Don’t have to keep an eye on the digital screen and turn off the air pump manually.

4 Measurement Units

There are 4 pressure measurement units: PSI, KPA, BAR, and KG/CM². You can switch the units by pressing the “R” button below the screen. The tire pressure will be displayed on the screen of the air pump so that the pressure can be better controlled when inflating tires to ensure safety.

Long Power Cord

Compared with other air pumps, the Nilight air pump has a long power cord with a length of 10.6ft, providing easier access to more space. Convenient to reach the front and rear tires of most types of cars.

Safety Design

The cigarette lighter was built in a 15A fuse to provide first-class protection from over-current surges and short circuits. The LED indicator lights up when the male plug is connected to the female plug on the car. Reminds you if this air pump is powered on.

Emergency LED Light

The air pump comes with a LED lighting feature of 3 modes to support your inflating needs in a dark environment. and in a safer operating environment.

 

EASY OPERATION

EASY OPERATION

Step 1: Start the car ignition

Step 2: Insert the car plug into the 12V DC power outlet.

Step 3: Connect the air chuck to the tire valve.

Step 4: Set the desired value, and wait for the LCD display to stop blinking.

Step 5: Press the start button to inflate the tires.

When the preset value is reached, the tire inflator will stop inflating automatically.

Common Q&A:

Question: Why does this pump not automatically stop?

Answer: Please make sure that the switch is pressed after the numbers stop blinking.

Question: Why does this pump stop filling my car tire at 25 psi while I need 30?

Answer: Please set the target air pressure to 30, before pressing the start button.